This website uses cookies to ensure you get the best experience on our website. To read our full cookie policy please click here.
Falex F400 Thermal Oxidation Tester, including Start-up Kit
Product Code: 400 001 004
ID: Falex F400
Falex Instruments F400
Jet Fuel Thermal Oxidation Testing
according to ASTM D3241, IP323, ISO6249
ASTM D3241 Thermal Oxidation Stability of Aviation Turbine Fuels requires a strict conformance for the jet fuel industry for this critical test. The Falex 400 matches results due to the critical equipment specification that controls the heater test section and test conditions.
The Falex F400 instrument can be used without modification for accurate testing of Diesel fuels due to a reliable and proven pump without additional filters required.
The Falex F400 allows custom testing outside the ASTM D3241 / IP323 scope, the following can be set as required:
| Temperature Range | 100 - 380 ° C |
| Flow Rate | 1.00 – 9.99 mL / minute |
| Test Duration | 4 - 600 minutes |
Designed for years of long operation, the reliable Falex 400 provides traceability, long maintenance intervals and results you can trust:
♦ Automatic aeration and fuel cleaning at the beginning of the test
♦ Priming is a snap with easy access and processor control
♦ Certified thermocouples guarantee accuracy without the need for calibration with lead. Operational Features
♦ Fast and Easy Operation * Pour-and-Go operation
♦ Large, Colour Touch Screen - fully protected against fuels and solvents
♦ Automatic Aeration • Automatic Sample Introduction
♦ Less than 600 ml are needed
♦ Ideal for Field Applications, mobile Laboratories
♦ Save a specific temperature as your standard test temperature
♦ Calibration is a breeze
♦ Push-button Flow verification; do it anytime as required
♦ Serialized calibrated temperature probes
♦ Automatic humidity sensor guarantees method compliance
♦ Maintenance Free Pump and Rugged Solenoid Valves
♦ Detailed On-Screen Reports and On-Board Result Database
♦ An optional certified differential pressure calibrator eliminates the traditional measuring and calculating to quickly verify, or recalibrate the ΔP without the use of fuel!
Start-up kit includes all additional items required to begin testing and for the end user to perform differential pressure and temperature calibration.
The full itemised list is as follows:
| 1 x Stainless Cleaning pan | 648 400 008 |
| 1 x Box of filter papers | 648 400 004 |
| 1 x Falex Mouse Pad | 657 100 019 |
| 1 x Large Funnel | 648 400 003 |
| 1 x Bus Bar Drip Pan | 400 021 006 |
| 1 x Heater Tube Assembly | 400 103 009 |
| 1 x Set of insulator Bushings | 400 018 003 |
| 1 x Heater Tube Output line assembly | 400 105 005 |
| 1 x Heater Tube output line assembly | 400 105 004 |
| 1 x Sample Output line assembly | 400 105 028 |
| 1 x Box of pre filters papers | 648 400 005 |
| 1 x Pre filter assembly | 400 105 010 |
| 1 x Cleaning Brush | 648 400 006 |
| 1 x Socket Wrench | 648 400 007 |
| 1 x Tweezers | 648 400 010 |
| 1 x Pump Syringe | 650 049 021B |
| 1 x Bag of 5 O-rings (pre filter) | 620 210 001 |
| 1 x Sample Input line assembly | 400 105 020 |
| 1 x bag of 25 O-rings (tubing) | 620 005 002 |
| 1 x Thermocouple – fuel sample | 650 009 055 |
| 1 x Thermocouple – heater tube | 650 009 064 |
| 1 x Lead calibration tube | 400 108 004 |
| 1 x Aeration line assembly | 400 105 002 |
| 1 x DP calibration bottle | 400 200 005 |
| 1 x Removal Tool | 648 400 009 |
| 1 x Pack of 5 charcoal filters | 400 025 002 |
| 1 x Box of 12 Heater Tubes | 400 560 001 |
| 2 x 1000mL glass beakers | 648 400 012 |
